Guide Bar And Saw Chain Combinations; Ec Declaration Of Conformity - McCulloch CS 35 Operator's Manual

Guide bar and saw chain combinations

The following cutting attachments are approved for the models McCulloch CS 35 and CS 35S.
Guide bar
Length, inch Pitch, inch
14 3/8"
16 3/8"

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service McCulloch CS 35 and CS 35S from 2016's serial numbers and onwards (the year is clearly
stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements of the
COUNCIL'S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
Conformity assessment procedure according to Annex V of the above directive has been used.
For information relating to noise emissions, see the Technical data chapter. The following standards have been applied:
EN ISO 11681-1:2011, EN ISO 14982:2009, CISPR12:2013
Notified body: TÜV Rheinland LGA Products GmbH, Tillystrasse 2, D-90431 Nuernberg, Germany, 0197, has carried
out EC type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificate
for EC type examination in accordance with annex IX, has the number: The certificates for EC type examination in
accordance with annex IX, have the numbers: BM 50351057
The supplied chain saw conforms to the example that underwent EC type examination.
Changzhou, China. July 8 2016
John Thompson, Product and Marketing director EUAP. (Authorized representative for Husqvarna AB and responsible
for technical documentation.)
TECHNICAL DATA
Max. nose
Gauge, mm
radius
1,3 7T
1,3 7T
Saw chain
Type Type
91PJ052X
14" 91-52 DC
(Oregon)
91PJ056X
16" 91-56 DC
(Oregon)
Length, drive
links (no.)
52
56
English – 27