Mounting - Chauvet SCORPION User Manual

Mounting

Orientation
Rigging
Mounting Diagram
Page 12 of 28
Before mounting this product, read and follow the safety recommendations indicated in
the Safety Notes section (page 2 of this manual).
The Scorpion™ GVC EU/RVM EU/RGY EU/BLU EU units may be mounted in any
position, provided there is adequate room for ventilation.
Be sure that the structure onto which you are mounting this product can support its
weight. Please see the "Technical Specifications" section of this manual for weight
information.
Mount the fixture securely. You can do this with a screw, a nut, and a bolt. You could
also use a mounting clamp if rigging this product onto a truss. The bracket has a hole 13
mm in diameter, which is appropriate for this purpose.
When mounting this product overhead, always use a safety cable.
Always consider ease of access to the unit for maintenance and programming purposes
before deciding on a location for this product
The bracket knobs allow for directional adjustment when aiming the fixture to the desired
angle. Do not use tools to loosen or tighten the bracket knobs. Doing otherwise could
damage the knobs.
Hanging Bracket
Safety
Rubber Feet
Scorpion™ GVC EU/RVM EU/RGY EU/BLU EU User Manual (Rev. 01d)
13 mm hole
Bracket Adjustment
Knob (1 of 2)