Operation - Chauvet SCORPION User Manual

Hide thumbs Also See for SCORPION:
Table of Contents

Advertisement

4. O
PERATION
Control Panel

Operation

Menu Branches
Changing
Options (Current
Menu Branch)
Changing
Options
(Different Menu
Branch)
Page 14 of 28
To access the control panel functions, use the four buttons located underneath the
display.
Button
Function
Press to find an operation mode or to
<MENU>
back out of the current menu option
Press to scroll up the list of options or
<UP>
to find a higher value
Press to scroll down the list of
<DOWN>
options or to find a lower value
Press to activate a menu option or a
<ENT>
selected value
The menu structure of the Scorpion™ GVC EU/RVM EU/RGY EU/BLU EU fixtures has
seven branches. Because the Scorpion™ BLU EU has a single color laser, its menu
branches have fewer options than the other models.
The structure of the menu branches is as follows:
Auto/Sound: 13 options (4 options for the BLU EU model)
Laser Sky Mode: 4 options (2 options for the BLU EU model)
Laser Sky Angle: 1 option (all models)
Sound Sensitivity: 10 options (all models)
DMX address: 503 options (all models)
Slave: 1 option (all models)
Reverse: 2 options with two values each (all models)
The control panel will remember the last setting you programmed, even after
you have turned the fixture off.
In addition, the control panel will remember the last selected option from each
menu branch.
To change an option on the same menu branch, do the following:
1) Press <MENU> once (the LED display will blink).
2) Press <UP> or <DOWN> until the desired menu option shows on the LED display.
3) Press <ENT> to accept the new option (the new option will show solid on the LED
display).
To change an option on a different menu branch, you must exit the current branch.
1) Press <MENU> once (the LED display will blink).
2) Press <MENU> repeatedly until seeing the active option of the desired menu branch.
3) Press <UP> or <DOWN> until the desired menu option within the new menu branch
shows on the LED display.
4) Press <ENT> to accept the new option (the new option will show solid on the LED
display).
Scorpion™ GVC EU/RVM EU/RGY EU/BLU EU User Manual (Rev. 01d)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents