Battery Hold Down - Traxxas Rustler 3701 Assembly Manual

21
STEP E-13
Attach the steering rod to the servo saver with the 3x15mm washerhead
machine screw and the 3mm locknut.
STEP E-14
Attach the steering rod to the right bellcrank with the 3x12mm washerhead
machine screw.
STEP E-15
Position the bellcranks so that they are pointing straight ahead, and fasten the
servo saver to the servo output shaft. Use the screw size recommended by
your radio system instructions to secure the servo saver. Use the correct
output shaft adapter when installing the servo saver onto the steering servo.
The steering assembly is complete. Check it at this time for smooth operation.

BATTERY HOLD DOWN:

STEP E-16
Locate the chassis, the battery hold-down plate, the two metal posts, two
body clips and speed control mount.
STEP E-17
Screw the posts into the chassis as shown.