Bag D Shock Assembly - Traxxas Rustler 3701 Assembly Manual

STEP C-9
Locate the two 78mm front camber links, four 3x12mm shoulder screws, and
four 3x6mm flat metal washers.
BANDIT:
The front camber links are 75mm overall length.
STEP C-10
Attach one end of each camber link to the front
shock tower by inserting the 3x12mm shoulder
screw through the camber link, sliding a 3x6mm
flat metal washer over the shoulder screw, and
screwing the shoulder screw into the front
shock tower.
STEP C-11
Attach the outer end of each camber link to the caster blocks with the
remaining two 3x12mm shoulder screws and 3x6mm flat metal washers.
Washer
STEP C-12
Locate the front bumper and two 4x12mm countersunk machine screws.
Attach the front bumper to the bottom of the front bulkhead. The front
suspension assembly is now complete.

BAG D SHOCK ASSEMBLY:

Limiter
STEP D-1
Your model is equipped with long front shocks and XX-long rear shocks.
Empty the shock parts from bag D onto a plate and separate the parts into
like groups. Build only one shock at a time. You will only use the limiter,
pictured in the drawing, when building each of the XX-long, rear shocks.
The long, front shocks do not require the use of the limiter.
15