Toshiba RAS-M10PKVP-E Service Manual page 136

No. Part name
1. Detachment
Fan guard
10
1) Perform works of Detachment 1 of
Work on the cardboard, cloth, and etc. in order to
prevent damage on the product.
2) Take off the discharge port cabinet and put it as
the fan guard side directs downward.
3) Take off the hooking claws (8 positions) of the
fan guard.
2. Attachment
1) Push the hooking claws (8 positions) with hands
from the front side and then fix the claws.
Check all the hooking claws are fixed at each
specified position.
1. Detachment
Fin guard
11
1) Remove the top plate. (Hexagonal screw Ø4 × 10, 6 pcs.)
2) Take off fixing screws for the fin guard and the anchor board.
(Hexagonal screw Ø4 × 10, 3 pcs.)
3) Mount a new fin guard.
Procedure
and
1
CAUTION
CAUTION
Fin guard
Fixing screws
– 136 –
Remarks
.
2
Bell mouth
Fan guard Hooking claw
Discharge
port cabinet