Toshiba RAS-M10PKVP-E Service Manual page 128

No. Part name
1. Detachment
Discharge
2
port cabinet
1) Perform work of Detachment 1 of
2) Take off screws for the discharge port cabinet
3) Take off screws for the discharge port cabinet
4) Take off screws for the discharge port cabinet
5) Take off screw for the discharge port cabinet
6) Take off screws for the discharge port cabinet
1. Detachment
Rear cabinet
3
1) Perform work of Detachment 1 of
2) Take off screw for the rear cabinet and the
3) Take off screw for the rear cabinet and the
4) Take off screws for the rear cabinet and the
5) Remove the rear cabinet by shifting it
Procedure
and the partition plate. (ST1T Ø4 × 8, 3 pcs.)
and the bottom plate.
(Hexagonal screw Ø4 × 10, 2 pcs.)
and the motor base. (ST1T Ø4 × 8, 2 pcs.)
and the heat exchanger. (ST1T Ø4 × 8, 1 pc.)
and the fin guard.
(Hexagonal screw Ø4 × 10, 2 pcs.)
valve fixed board.
(Hexagonal screw Ø4 × 10, 2 pcs.)
anchor board.
(Hexagonal screw Ø4 × 10, 1 pc.)
heat exchanger.
(Hexagonal screw Ø4 × 10, 2 pcs.)
obliquely backward and upward.
– 128 –
.
1
Heat exchanger
Fin guard
Discharge port cabinet
.
1
Remarks
Motor base
Partition plate
Rear cabinet Rear cabinet Rear cabinet
Inverter assembly Inverter assembly Inverter assembly
Rear cabinet Rear cabinet Rear cabinet