Tv/Line - Daewoo TVZ 1321 Service Manual

Tv/vcr in one board, chassis : cn-140 ntsc-m system
Table of Contents

Advertisement

15 TV/CATV
Use this button to set up your TV/VCR to receive signals
from an antenna(TV) or a cable system(CATV).

16 TV/LINE

Use this button to select between viewing the signal
15
coming from an antenna terminal(TV) or the signal
coming from the A/V Jacks(LINE).
17 FF (Fast Forward)
16
Use this button to "Fast Forward" a tape or to change
items in the menu system.
18 PAU./STILL
17
Press to temporarily stop the tape during recording or
18
playback, or to move the cursor in the menu system.
19 V/H
19
This is a one of the adjustment mode.
When press this button, only horizontal line is showed up
20
the screen.
20 S/TEST
Not used.
21
22
21 ATK OFF (Autotracking OFF)
Press this button to adjust x-path Adjustment and to con-
23
firm fine tracking.
24
Front Panel's leds are lighted up if you press this button.
Use only adjustment tape.(DN-1:color bar)
25
After adjustment, Press this button repeatedly until leds
are off. and Press stop button twice.
After then, Insert tape and confirm fine tracking opera-
tion.
26
22 P/TEST (Picture Test)
Use this button to confirm screen's condition.
(contrast, bright, tint, color, sharpness)
23 CLOCK
Use this button to test time operation. If you press this
button, the time go( 60)faster than normal mode.
24 D.P (Digital Preset)
Use this button to adjust screen menu.
(contrast, bright, tint, color, sharpness)
27
25 REC/T (Record Test)
28
Use this button to confirm self record-playback.
Operation
{Recording(SP:5sec, SLP:5sec) Zero stop(REW)}
26 RECALL
Press this button to display the current time, the counter,
channel number or other status items.
27 SLOW (only 4HD)
Press this button to begin slow playback.
28 SPEED (only 4HD)
Press this button to change slow playback speed.
30

Advertisement

Table of Contents
loading

Table of Contents