Daewoo TVZ 1321 Service Manual page 20

3. There are two (2) triangular marks on the mode sense switch. When installing the L/C bracket assembly on the main
base, confirm that the two (2) triangular marks align with each other in the EJECT mode (Fig. 3)
Fig. 3 - Mechanical checks/Mode Sense S/W Alignment
4. Make sure that the boss "A" of the Pinch Lever Total Ass'y is positioned at the point "B" of the cam gear in EJECT mode
(fig. 4).
Fig. 4 – Mechanical Checks/Pinch Lever and Cam Gear Alignment
18