Daewoo TVZ 1321 Service Manual page 23

Operating the VCR Without a Cassette Tape
1. Remove the cassette Loading Mechanism.
2. By hand revolve the worm gear counterclockwise 7-8 times until pole base loading process starts automatically.
3. Then PLAY mode appears. If you want ANOTHER mode, Press the desired button.
4. If the mechanism is in the desired mode, remove the Power(by unplugging cord).
Tension Pole Position Adjustment
1. Make the mode PLAY without a cassette loaded. Refer to "Operating the VCR Without a Cassette Tape".
2. Confirm that the pilot hole on the tension lever coincides with that of the main base.
3. If the above confirmation is not satisfied, turn Band Brake Cap clockwise or counterclockwise until the two holes are
coincide with each other.
Fig. 7- Tension Pole Position Adjustment
21