Table of Contents
Advertisement
Fig. 20- Loading Gears/Loading Rack Alignment
A/C Head Assembly Removal
1. Remove one (1) nut hex from the A/C head assembly
(Fig. 21)
2. Remove the A/C head assembly
head spring
from the A/C head assembly
NOTE :
After reinstalling, perform all A/CHead adjustment proce-
dures and all tape path alignment procedures in publication.
Perform the "Audio Bias Level Adjustment" in the "Electrical
Adjustment" section of this service manual.
Fig. 21- A/C Head Assembly Removal
L/C Bracket Assembly removal
1. Remove one (1) screw
NOTE :
When reassembling, refer to Fig. 23 for alignment instruc-
tions.
Replacement of Pinch Lever Total Assembly
Removal
1. Remove one (1) washer
2. Unhook the pinch spring
NOTE :
Take care not to get oil on the outside surface of the pinch
(Fig. 21)
roller
and remove the A/C
Fig. 22- Replacement of L/C Bracket Total Assembly/Pinch
14
bly
and remove the L/C bracket assembly
deck mechanism (Fig. 22)
(Fig. 22)
remove the pinch lever total assembly
.
Lever Total Assembly/cam Gear/Relay Lever/F/L Rack
(Fig. 22)
from the L/C bracket assem-
from the
.
from the main base
.
and
Advertisement
Chapters
Table of Contents
