Pre-Assembly - Horizon Fitness ANDES 6 Owner's Manual

UPPER HANDLEBAR
ANDES 6
ANDES 8
PULSE GRIPS
FOOTPAD
ROLLER WHEEL COVERS
GUIDE RAIL SET
REAR COVER
4
partS inclUDeD:
partS BoX inclUDeD:
FRONT / REAR CONSOLE MAST COVER
UPPER HANDLEBAR COVER
LOWER HANDLEBAR
PEDAL ARM
CRANK COVER
POWER CORD SOCKET
LOWER LINK ARM
pre ASSEMBLY
1 Main Frame
UnpacKinG
2 Upper Handlebars Set
1 Console Mast Set
Unpack the product where you will be using it. Place the elliptical carton on a level flat
1 Console Box
surface. It is recommended that you place a protective covering on your floor. Never
1 Parts Box
open box when it is on its side.
NOTE: during each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded in before completely tightening any ONE bolt.
1 Hexagon L-Wrench #5 (W/Screwer) NOTE: A light application of grease may aid in the installation of hardware. Any grease,
1 Front Console Mast Cover
such as lithium bike grease is recommended.
( dWg NO.EP247-Q10)
1 Rear Console Mast Cover
( dWg NO.EP247-Q09)
1 Power Cord
1 Owners Manual neeD Help?
If you have questions or if
there are any missing parts,
contact Customer Tech
Support.
ANDES 6
ANDES 8
5