Tools Required; Parts Included; Pre-Assembly; Need Help - Horizon Fitness SYROS 3.0 Owner's Manual

UPPER HANDLE BAR
PULSE GRIPS
CONSOLE MAST
WATER BOTTLE HOLDER
FOOT PADS
CRANK COVER
REAR STABILIZER
12

TOOLS REQUIRED:

F 13/15 mm Flat Wrench
TABLET/READING RACK F 5 mm L-Wrench
F Screwdriver
READING RACK
CONSOLE

PARTS INCLUDED:

F 1 Console
F 2 Upper Handlebars
F 1 Console Mast
F 1 Stabilizer Tube
F 1 Rear Stabilizer
F 1 Water Bottle Holder
LOWER HANDLEBAR
F 2 Pedal Arms
F 2 Lower Handlebars
TOP CAP
F 2 Foot Pads
F 1 Main Frame Assembly
F 1 Adapter Cable
F 1 Tablet/Reading Rack
PEDAL ARM
STABILIZER TUBE
POWER CORD SOCKET
PRE ASSEMBLY
UNPACKING
Unpack the product where you will be using it. Place the elliptical carton on a level flat
surface. It is recommended that you place a protective covering on your floor. Never
open box when it is on its side.
WARNING
• It is recommended that two people work together for ease and efficiency while
assembling an elliptical.
• During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded. It is recommended you complete the full assembly of your unit
before completely tightening any ONE bolt.
• Several parts have been pre-lubricated to aid in assembly and usage. Please do
not wipe this off. If you have difficulty, a light application of lithium bike grease is
recommended.

NEED HELP?

If you have questions or if there are any missing parts, please refer to safety sticker
on product to contact Customer Tech Support.
13