Stopping The Engine; Drive Disengagement Lever - Jonsered Front Rider FRM13A Operator's Manual

WARNING!
Never drive the machine on
ground with a slope of more than
15°. Mow slopes upwards and
downwards, never across. Avoid
sudden changes in direction.
Hill start, manual gearbox
1. Press down the parking brake.
2. Push the throttle control to 3/4 position to full
throttle position.
3. Push down the clutch and engage first gear.
4. Carefully release the clutch.
5. When the engine starts to pull, release the parking
brake.

Stopping the engine

Preferably allow the engine to idle for a minute to
obtain normal working temperature before stopping
it if it has been working hard.
1. Lift up the cutting unit by pulling the lever back
to the end position.
2. FR 13: Pull back the throttle control and put the
gear lever into neutral "N" without pressing the
reverse lock button. Turn the ignition key to the
"STOP" position.
FRM 13 A: Pull back the throttle lever and turn
the ignition key to the "STOP" position.
3. When the rider mower is stationary, hold down
the parking brake and push in the lock button.
Release lever FRM 13 A
In order to move the machine when the engine is
switched off the release lever must be pressed
down and forwards.
18
– English
DRIVING
MAX 15°
STOP START