Lever For Adjustment Of Cutting Height; Seat; Fuelling - Jonsered Front Rider FRM13A Operator's Manual

Lever for adjustment of cutting height

With this lever the cutting height can be adjusted to
9 different positions.
Cutting unit with rear ejection, 40-90 mm.
BioClip cutting unit,

Seat

The seat has a jointed attachment on the front
edge and can be tipped forward.
The seat can also be adjusted lengthways.
Release the knobs under the seat and adjust it
forwards or backwards to the required position.
Lock the adjustment with the wheels.

Fuelling

The engine should be run on 85 octane (or higher)
unleaded petrol/gasoline (no added oil). Environ-
mentally adapted alkylate fuel, such as Aspen, is
also recommended.
!
WARNING!
Petrol/gasoline is highly inflammable.
Observe care and fill up with fuel
outdoors (see safety instructions).
PRESENTATION
45-95 mm.
13
English –