Key To Symbols; Symbols - Jonsered FR 2113 MA 4X4 Operator's Manual

Symbols

These symbols are on the machine and in the instr uctions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the oper ator's manual
carefully and make sure you understand
the instructions before using the machine.
Alw ays wear:
• Approved hearing protection
This product is in accordance with
applicable EC directives.
Re verse
Neutr al
F ast
Slo w
Stop the engine .
Batter y
Chok e
Fuel
Oil le vel
Cutting height
Bac kwards
F orwards
6 –
English
KEY T O SYMBOLS
Ignition
Hydrostatic free wheel
Clutch in
Clutch out
P arking brake
Br ake
Clutch
Noise emission to the en vironment according
to the European Community's Directive. The
machine's emission is specified in chapter
Technical data and on label.
Rotar y blades Keep hands and feet
away from under the hood when the
engine is running
Risk that the machine will tip o ver
Never drive across a slope
Never use the machine if persons,
especially children, or animals, are in the
vicinity
Never carry passengers on the machine or
equipment
Drive very slowly if no cutting unit is fitted