Key To Symbols; Symbols - Jonsered FR2311 M Operator's Manual

Symbols

These symbols are on the machine and in the instr uctions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
Alw ays wear:
• Approved hearing protection
This product is in accordance with
applicable EC directives.
Re verse
Neutr al
F ast
Slo w
Stop the engine .
Batter y
Chok e
Fuel
Oil le vel
Cutting height
Bac kwards
F orwards
Ignition
KEY T O SYMBOLS
Warning: rotating parts. Keep hands and feet
clear.
Clutch in
Clutch out
P arking brake
Br ake
Clutch
Noise emission to the en vironment
according to the European Community's
Directive. The machine's emission is
specified in chapter Technical data and on
label.
Rotar y blades Keep hands and feet
away from under the hood when the
engine is running
Ne ver drive across a slope
Ne ver use the machine if persons,
especially children, or animals, are in the
vicinity
Ne ver carry passengers on the machine or
equipment
Dr ive very slowly if no cutting unit is fitted
The cutting dec k must be fitted at full
speed.
Switch off the engine and tak e off the ignition
cable before repairs or maintenance
– 5
English