Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CDA HVC93
Summary of Contents for CDA HVC93
- Page 1 Manual for Installation, Use and Maintenance Passionate about style Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu...
- Page 2 Under no circumstances should any external covers be removed for servicing or maintenance except by suitably qualified personnel. Appliance information: Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with your appliance and to register your appliance for guarantee purposes. Appliance Model...
- Page 3 Please note: Before operating this hob, please read the instructions carefully After unpacking the appliance, make sure it is not damaged. In case of doubt, do not use the appliance and contact your supplier. Remove all packaging and do not leave the packing materials in easy reach of children as they may cause serious injury. The packaging materials are recyclable.
-
Page 4: Using Your Hob
Using your hob HVC93 Zones: Front left: 1/2.2kW - 140/210mm dual Centre left: 1.2kW - 140mm Centre right: 0.7/1.7kW - 120/180mm dual Front right: 1.2kW - 140mm Touch control panel Fig. 1 8 10 Fig.3 Touch control Zone indicator key... - Page 5 How to use the hob The ceramic surface of the hob allows fast transmission of heat vertically from the heating elements under the glass to the pans Hi-light cooking zone on the hob top. Ø 140mm The heat does not spread horizontally, so the hob top remains relatively cool only a few centimetres from the zone in use.
- Page 6 How to use the hob Power Level Type of cooking Switched off For melting (butter/chocolate) or keeping food warm Keeping food hot or to heat small quantites of liquid Heating large quantities of liguid (sauces etc.) Slow boiling e.g. spaghetti, soups, stews, potatoes Gentle frying Browning meats, frying fish.
- Page 7 How to use the hob The Timer/ Minute Minder The timer allows you to preset the length of time any of the zones will be on, between a minimum of one minute and a maximum of 99 minutes. The timer can be used on each zone separately and can also be used as a minute minder, to countdown the time without using any of the zones.
-
Page 8: Safety Features
Safety Features The childlock The hob is equipped with a childlock to lock all the controls except, for safety reasons. This can be used when the hob is off or during cooking. To set the childlock Touch to switch the hob on. Touch and hold for approximately 2 seconds. - Page 9 Safety Features Auto-stop Protection Power level of Cooking Operation time limit The hob is equipped with a sensor that will switch off the zone zones after a factory set period of time if not keys are touched once the 6 hours zone is switched on.
-
Page 10: Efficient Use Of Your Hob
Efficient Use of your Hob The hob is equipped with zones of different sizes, designed to accommodate most shapes and sizes of pan. For best results, only use pans with flat bottoms and choose an appropriate zone depending on the size of the pan. The most efficient use of the hob is shown below, where the pan and zone are correctly chosen. -
Page 11: Care And Maintenance
3. Check that the fuse in the spur has not blown. Contact CDA Customer Care A : Customer Care Department, The CDA Group Ltd, Harby Road, Langar, Nottinghamshire, NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu... -
Page 12: Mains Electricity Connection
Mains Electricity Connection Warning! this appliance must be earthed We recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations. This appliance is intended to be connected to fixed wiring and is not suitable for connection to a 13A plug or 13A supply. -
Page 13: Fitting The Hob
Fitting the Hob Unpacking the hob: • Take care not to lose or mishandle any parts. Fitting position of the hob: This appliance must be installed a minimum of 50mm from any back wall and a minimum of 190mm away from any adjacent vertical surfaces, e.g. -
Page 14: How To Install The Hob
How to Install the Hob How to install the hob: Overall dimensions of the hob: HVC93 width 900mm depth 350mm Worktop cut-out dimensions: HVC93 width 880mm depth 335mm 1. Make the required hole in the worktop. Before doing this, you must check the instructions supplied with any cooker hood to ensure that you will have the required clearance. - Page 16 Passionate about style Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu...