CDA HVN61 Manual For Installation, Use And Maintenance page 12

Touch the
flash the number of minutes the zone has been on the current power
level for five seconds.
To set the remaining cooking time
Touch the
is flashing, touch the
The timer display will show the required time for three seconds and
beep to confirm the function is set, then the remaining cooking time is
displayed.
Please note:
Once the cooking time is set, you cannot change it for five seconds
after touching the
flashing, the cooking time can be changed.
The Tempo function shows the total time elapsed since the last
power level was set. If you change the power level, the time
elapsed is reset.
12
key at any time during cooking. The timer display will
key at any time during cooking. Whilst the timer display
key to set the total cooking time required.
key. After the timer display has stopped