CDA HVN61 Manual For Installation, Use And Maintenance page 10

Hide thumbs Also See for HVN61:
Table of Contents

Advertisement

Please note:
Using the boost or precook function on one zone automatically
limits the power level available to the other zone on the same side. If
you wish to use several pans at the same time, try to use zones on
opposite sides.
When the zone display shows PC, the zone will switch off
automatically after five seconds if the power level is not set.
The precook time is preset according to the power level selected.
The precook function can only be used for cooking at power levels
6-12.
If you have set the direct power key to a power level below six,
touching that key when setting the precook function will set the
power level at 6.
The timer
The timer allows you to preset the length of time any of the zones
will be on, between a minimum of one minute and a maximum
of ninety-nine minutes. The timer can be used on each zone
separately.
To set the timer
First switch on the zone and set the power level.
Touch either the
required duration.
To go straight to the maximum 99 minutes, touch the
when the timer is switched on.
10
or
keys until the timer display shows the
key once

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvn81

Table of Contents