Connections; Connecting To A Tv; Connecting To A Display Device With Hdmi Cable - Denon DVD-1800BD Owner's Manual

ENGLISH

Connections

Connecting to a TV

Make one of the following connections, depending on the capabilities of your existing device.
display device analogue
audio
AUDIO IN
R L
RCA audio
and
cable
this unit
AUDIO
OUT
L
R
AUDIO OUT

Connecting to a Display Device with HDMI Cable

Connecting this unit to device with an HDMI jack using an HDMI cable enables digital transfer of both
digital video signals and multi-channel audio signals.
After making the connection, please make HDMI settings on setup menu according to your display
device. Refer to pages 18-19.
*1, 2
Method 4
best audio and picture
display device
To HDMI Input jack
A display device with an HDMI compatible port
*1) This unit is compatible with the progressive scan system. The feature provides you with the higher quality
pictures than traditional output system does. To utilise this feature, a component or an HDMI connection is
required. Refer to the "HDMI Video Resolution" or "Component Output" on page 18 to set the resolution.
*2) Analogue audio connection is not required for this connection.
*1
Method 1 Method 2
better picture
standard picture
VIDEO COMPONENT
VIDEO IN
IN
Y
(Green)
P /C
B B (Blue)
P /C
RCA video R R
(Red)
cable
component
video cable
or
or
(Green) (Red)
VIDEO
OUT
COMPONENT
VIDEO OUT
Y P /C
R R
(Blue)
P /C
B B
VIDEO OUT COMPONENT
VIDEO OUT
this unit
HDMI cable
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
*1 Please purchase the rest of the necessary cables at your local store.
Method 3
best picture
Note
DVI IN
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR,
pictures may be distorted due to the copy protection system.
• If the display device to which the player is to be connected is compatible with progressive scan
video, connect to the component video input.
HDMI-DVI
• This unit's COMPONENT VIDEO OUT jacks are compatible for 480i/576i/480p/576p/720p/1080i
cable
video resolution. If the connected display device is not compatible for 480p/576p/720p/1080i
video resolution, set "Component Output" to "480i/576i".
• If the picture is not output properly to the display device because of the "HDMI Video
Resolution" or "Component Output" setting, press and hold B on the front panel for more than
5 seconds. The "HDMI Video Resolution" setting will be reset to the default automatically.
• If you are using HDMI connection and set "HDMI Video Resolution" to "1080p" or "1080p24",
picture may not be output properly to the display device. In that case, set "HDMI Video
Resolution" to "480i/576i", "480p/576p", "720p" or "1080i".
HDMI OUT
10
ENGLISH
Connections