BRINKMAN Vertex Sear Owner's Manual page 26

Step 4
Place left side panel over two
pre-attached bolts on side bottom shelf
and slide toward back of grill. Tighten
bolts securely. Remove the bolt which
is pre-attached to the side panel. Set
aside for later use.
Step 5
Remove three bolts from the side
burner assembly. Align pre-attached
bolt in side burner control panel with
corresponding key hole in side burner
assembly. Insert and slide to the right
(as shown). Tighten bolt securely.
Re-attach previously removed bolt. Set
other two bolts aside.
Step 6
Remove bolt from big firebox control
panel. Attach the side burner assembly
to the big firebox. Place key holes in
side burner assembly over pre-attached
bolts and slide down, then tighten
securely. Attach side burner front panel
to grill body using the previously
removed bolt.
Note: Only need to tighten two lower
bolts after sliding assembly
down.
25
Bolt to Set
Aside for
Future Use
Bolts to Set Aside
for Future Use