BRINKMAN Vertex Sear Owner's Manual page 25

Choose a good, cleared assembly
area and get a friend to help you put
your grill together. Lay card board
down to protect grill finish and
assembly area.
CAUTION! Some parts may
contain sharp edges.
Wear protective
gloves if necessary.
Step 1
Attach right side table to the grill
cart using six pre-attached bolts
from the grill cart.Tighten the
bolts.
Step 2
Attach the plastic caster to the
side bottom shelf using wrench
provided.
Step 3
Place side bottom shelf over two
pre-attached bolts on the grill cart
and slide toward back of grill.
Tighten bolts securely.
24