Lp Conversion Instructions - Travis Industries 31 DVI GSB2 Owner's Manual

Optional Equipment

LP Conversion Instructions

Convert the appliance prior to installing the gas line to ensure proper gas use.
1. Remove the glass. Remove the media (if installed).
2. Access the firebox.
3. Remove the two screws holding the ember trays in place (see below). Remove the side ember trays. Grasp the
burner with both hands and lift it straight up and out of the firebox.
4. Remove the manifold cover to access the burner orifices (see below).
5. Install the LP (propane) orifices.
ORIFICE SIZE (ID)
© Travis Industries
Front Burner Orifice
a
1/2" Wrench
Orifice ID
Natural Gas
Front Burner Orifice #50 DMS
Rear Burner Orifice
(
for qualified installers only)
Rear Burner Orifice
b
Thread Sealant
LP (Propane)
#58 DMS
#47 DMS #56 DMS
4140813
c
15/16"
24mm
35
100-01296