Switching The Left And Right Screens; Switching The Left And Right Image Sizes - Epson EB-G5750WU User Manual

Projecting Two Images Simultaneously (Split Screen)
The Split Screen Setup will also be displayed when the [Source
q
Search] button is pressed on the remote control or control panel or
when a Source button is pressed on the remote control.
C
To switch the image projected on the left screen, select "Source
Left" and press the [Enter] button. To switch the image
projected on right screen, select "Source Right" and press the
[Enter] button.
D
Select the input source to project and press the [Enter] button.
Only the input sources that can be combined can be selected.
"Input Sources for Split Screen Projection"
s
To switch the projected image during split screen projection, start the
procedure from step 2.
• The audio from the input source that is selected for the left screen
q
will be output.
• If Computer1 or BNC is selected for the left screen, the image for
the left screen can be displayed on an external monitor. (This is
possible only when analog RGB signals are input.) s

Switching the left and right screens

Use the following procedure to switch the images displayed on the left and
right screens.
Procedure
A
Press the [Menu] button on the remote control or the control
panel during split screen projection.
B

Switching the left and right image sizes

p.30
Procedure
A
B
C
p.131
D
Select "Swap Screens" and then press the [Enter] button.
The images on the left and right screens will be swapped.
Press the [Menu] button on the remote control or the control
panel during split screen projection.
Select "Screen Size" and then press the [Enter] button.
Select the image size to display and then press the [Enter]
button.
Press the [Menu] button to end the setting procedure.
31