Preparing The Remote Control; Installing The Remote Control Batteries; Remote Control Operating Range; Operating Range (Left To Right) - Epson EH-LS500W User Manual

Preparing

Preparing the Remote Control

Installing the Remote Control Batteries

Attention
•
Check the positions of the (+) and (-) marks inside the battery holder to ensure the batteries are inserted the
correct way.
•
You cannot use other batteries except for AAA size manganese or alkaline.
a
Remove the battery cover.
While pushing the battery compartment
cover catch, lift the cover up.
b
Replace the old batteries with new
batteries.
Check the polarity of the batteries (+) and
(-) before installing.

Remote Control Operating Range

Operating range (left to right)

30°
30°
6m
55° 55° 55°
55° 55° 55°
6m
21
c
Reattach the battery cover.
Press the cover until it clicks into place.
c
If delays in the responsiveness of
the remote control occur or if it
does not operate, it probably
means that the batteries are
becoming flat. Replace with two
new batteries (AAA size
manganese or alkaline batteries).

Operating range (top to bottom)

6m
60°
6m
60°
15°