Adjusting the Projected Image
• H/V-Keystone
This allows you to manually correct distortion in the horizontal and
vertical directions independently. You can perform easy H/V-Keystone
corrections by using the [
w
on the projector's control panel.
Quick Corner and horizontal and vertical keystone cannot be performed at
the same time. When the Keystone correction method is selected from the
Configuration menu, the correction method you choose is assigned to the
control panel [
/
], [
/
w
v
setting for Keystone is set to H/V-Keystone, so when [
[
/ ] and [
/ ] buttons are pressed, H/V-Keystone correction is carried
<
>
out.
Because Quick Corner and H/V-Keystone correction can be carried out
while projecting a test pattern, you do not need to make preparations by
connecting a computer or other equipment.
/
], [
/
], [
/ ] and [
/ ] buttons
v
<
>
"H/V-Keystone"
p.23
s
], [
/ ] and [
/ ] buttons. The default
<
>
/
w
Quick Corner
Procedure
A
Press the [Menu] button while the projector is projecting.
Select Settings menu - "Keystone" and then press the [Enter]
button.
Using the Remote Control
], [
/
],
v
B
Select "Quick Corner", and then press the [Enter] button.
Press the [Enter] button again to display the selection screen from
which you can select one of four corners.
"Using the Configuration Menu"
s
Using the Control panel
21
p.50