Setting The Remote Control Id - Epson EB-G5750WU User Manual

Limitation of the Number of the Target Projectors when Using Multiple Projectors
Procedure
A
Set the remote control ID switch to On.
B
During projection, while holding the [ID] button, press the
[Help] button.
Remote Control
When you press the buttons, the current Projector ID is displayed on
the projection screen. It disappears in about three seconds.

Setting the Remote Control ID

Procedure
A
Set the remote control ID switch to On.
B
While holding the [ID] button, press a number button to select
a number to match the ID of the projector you want to
operate. "Checking the Projector ID"
s
Once this setting has been made, the projector that can be operated by the
remote control is limited.
39
p.38