When projecting images from a laptop computer connected to the projector with a computer cable, the output for the video signal must sometimes be changed

at the computer. Refer to the documentation for your computer for the method to change the video output.

• Example of changing the output (Windows computers)

Hold down the [Fn] key on your computer and press the function key labeled CRT/LCD,

monitor, press the same keys again.

Connecting to Video Equipment

This section provides examples of connecting the projector to video equipment. The video equipment port and cable names may also be different from those

given.

Port on the video equipment

Connection 1

Component outputs

Audio Out port

Connection 2

Component outputs

Connecting cable

RCA component video cable (commercially available) + BNC/RCA

adapter (commercially available)

Audio cable (commercially available)

Component cable (D-sub/component conversion) (optional