Part Names And Functions; Front/Top - Epson EB-G5750WU User Manual

Part Names and Functions

Front/Top

The illustration shows the projector with a standard zoom lens installed.
Name
A
Open this cover when replacing the projector's lamp.
Lamp cover
p.97
s
B
Air exhaust vent Exhaust vent for air used to cool the projector internally.
Function
Caution
Do not place objects that may become warped or
otherwise affected by heat near the Air exhaust vent
and do not put your face or hands near the vent
while projection is in progress.
Name
C
Front adjustable foot Extend and adjust the position of the projected image
when the projector is placed on a surface such as a desk.
s Quick Start Guide
D
Pull out the foot lever to extend and retract the front foot.
Foot adjust lever
s Quick Start Guide
E
Zoom ring Adjusts the image size. s Quick Start Guide
F
Images are projected through here.
Projection lens
G
Press this button to remove the lens unit when replacing
Lens unit removal
lens units. s
button
H
Remote receiver Receives signals from the remote control. s
I
Focus ring Adjusts the image focus. s Quick Start Guide
J
Air filter tab When cleaning or replacing the air filter, use this tab to
pull out the air filter. s p.94,
K
The color of the indicators and whether they are flashing
Status indicators
or lit indicate the status of the projector. s
L
This indicator shows the status of network access when the
Wireless LAN indicator
Wireless LAN unit is installed. s
M
Air intake vent Takes in air to cool the projector internally. If dust collects
here it can cause the internal temperature to rise, and this
(Air filter)
can lead to problems with operation and shorten the
optical engine's service life. Be sure to clean the air filter
regularly. s
N
Vertical lens shift dial Turn the dial to move the position of the projected image
up or down. s
O
Turn the dial to move the position of the projected image
Horizontal lens shift
left or right. s
dial
Function
p.133
p.17
p.100
p.80
p.135
p.94
p.20
p.20
10