Connecting To External Equipment; Connecting A Lan Cable; Connecting To An External Monitor; Connecting To External Speakers - Epson EB-G5750WU User Manual

Connecting to External Equipment

Connecting a LAN Cable

Connect with a commercially available 100BASE-TX or 10BASE-T LAN
cable.
Connected equip- Connecting cable
ment
LAN port on network LAN cable (commercially
hub available)
Attention
To prevent malfunctions, use a category 5 shielded LAN cable.

Connecting to an external monitor

You can display computer images input from a computer on an external
monitor connected to the projector and the screen at the same time. This
means that you can check projected images on an external monitor when
giving presentations even if you cannot see the screen. Connect using the
cable supplied with the external monitor.
Projector port
LAN port

Connecting to External Speakers

Only analog RGB signals from a computer connected to the
q
Computer1 input port or the BNC input port can be displayed on an
external monitor. Images from equipment connected to other ports
and component video signals cannot be displayed.
Connected equip- Connecting cable
ment
Monitor Cable supplied with monitor Monitor Out port
• Setting gauges such as Keystone, the configuration menu, or Help
q
screens are not output to the external monitor.
• The image is not displayed on the external monitor when the
projector is on standby.
You can connect speakers with built-in amplifiers to the projector's Audio
Out port to enjoy a fuller quality of sound. Connect with a commercially
available audio cable (pin plug
W
an audio cable compatible with the connector on the external speakers.
Connected equip- Connecting cable
ment
Audio device Audio cable (commercially
available)
Projector port
3.5 mm stereo mini plug and so on). Use
Projector port
Audio Out port
131