Adjusting The Position Of The Projected Image (Lens Shift); Correcting Distortion In The Projected Image - Epson EB-G5750WU User Manual

Adjusting the Projected Image
To set menu items that cannot be set while the test pattern is being
q
displayed or to fine-tune the projected image, project an image from
the connected device.
C
Press the [Esc] button to end the test pattern.
Adjusting the Position of the Projected Image
(Lens Shift)
The lens can be shifted to adjust the position of the projected image, for
example, when the projector cannot be installed directly in front of the
screen.
Procedure
Turn the vertical lens shift dial or horizontal lens shift dial on the
projector to adjust the location of the projected image.
The image will be clearest when both the vertical and horizontal lens
q
shift dials are set in the center.
The ranges within which the image can be moved using the lens shift dials
are shown below.
A
Center of lens
B
Projected image when lens shift dials are set in the center

Correcting Distortion in the Projected Image

There are two methods of correcting distortion in projected images as
below.
• Quick Corner
This allows you to manually correct each of the four corners of the
projected image separately.
We recommend using Quick Corner to accurately adjust keystone
distortion.
"Quick Corner" p.21
s
20