Preparation; Installing/Replacing The Batteries - Omron R3 Instruction Manual

2. Preparation

2.1 Installing/Replacing the Batteries

1.
Remove the battery cover.
1)
Push the hook on the bottom of the battery cover.
2)
Pull the cover off the main unit.
2.
Insert two 1.5V "AAA" alkaline (LR03)
batteries as indicated in the battery
compartment and then replace the
battery cover.
Notes:
• If the battery low symbol (
the unit off then replace both batteries at the same time.
• The measurement values continue to be stored in memory even after the batteries are
replaced.
Disposal of used batteries should be carried out in accordance with the national regulations for
the disposal of batteries.
4
) appears on the display, turn
2
1