Using The Memory Function - Omron R3 Instruction Manual

3. Using the Unit

3.4 Using the Memory Function

The monitor automatically stores the result up to 60 sets. It can also calculate an average reading
based on the measurements from the last three readings taken within 10 minutes. If there are
only two readings in memory for that period, the average will be based on two readings. If there is
one reading in memory for that period, the average will be based on one reading.
Notes:
• If the memory is full, the monitor will delete the oldest readings.
• When viewing the reading taken without setting the date and time, "-:--" is displayed instead
of the date and time.
View the Average
Value
• If the previous
reading was taken
without setting the
date and time, the
average value is not
calculated.
10
Average Value
View Previous
Reading
• The Memory number
appears for a second
before the pulse rate
is displayed. The
newest set is
numbered "1".
Previous Reading
Alternating date/time display
View Readings
Stored in Memory
• Hold down to view
readings rapidly.