Table of Contents
Advertisement
2.1 Battery Installation
1. Remove the battery cover.
2. Insert 4 "AA" batteries as
indicated in the battery
compartment.
Note:
• 4 "AA" batteries are not included in this unit.
3. Replace the battery cover.
Note:
• When the low battery symbol (
off, then replace all batteries at the same time. Long life alkaline batteries
are recommended.
• The measurement values continue to be stored in memory even after the
batteries are replaced.
• Disposal of used batteries should be carried out in accordance with local
regulations.
2. Preparation
) appears on the display, turn the monitor
15
Advertisement
Table of Contents
