Transmitter/Receiver Learn Routine; Transmitter Configuration - Avital 2300 Installation Manual

transmitter/receiver learn routine

The system comes with two transmitters that have been taught to the receiver. Use the following learn routine to
add transmitters to the system or to change button assignments if desired.
The Valet ® /Program switch, plugged into the blue port, is used for programming. There is a basic sequence to
remember whenever programming this unit: Door, Key, Choose, Transmit and Release.
1.
2.
3.
24
Open a door. (The GREEN wire, H1/5, or the VIOLET, H1/7 must be connected.)
Key. Turn the ignition on. (The H1/9 YELLOW switched ignition input must be connected.)
Choose. Press and release the Valet
access the desired channel, then press the switch once more and Hold it. The siren will
chirp and the LED will blink the number of times corresponding to the channel that has
been accessed.
/Program switch the number of times necessary to
®
© 2001 Directed Electronics, Inc. Vista, CA