Plug-In Led And Valet/Program Switch; Internal Programming Jumper; Wire Connection Guide - Avital 2300 Installation Manual

H3/3 VIOLET/BLACK (-) 200 mA channel 4 output
This wire supply a (-)200mA output whenever the button(s) controlling channel four is pressed and will continue
until the button(s) is released. This output can be used to control optional accessories.
IMPORTANT! Never use this wire to drive anything but a relay or a low-current input! This
transistorized output can only supply (-)200 mA, and connecting directly to a solenoid, motor, or
other high-current device will cause the module to fail.
NOTE: Many of the options that can be operated with this output require the addition of the relay
accessory package (p/n 8617).
starter interrupt harness (H4) wire connection guide
______
H4/1
______
H4/2
H4/1 and H4/2 BLACK starter interrupt wires
Use one of these wire as a starter interrupt input and the other as a starter interrupt output wire.
NOTE: These two black wires are interchangeable.
21
BLACK
BLACK
STARTER INTERRUPT INPUT
STARTER INTERRUPT OUTPUT
© 2001 Directed Electronics, Inc. Vista, CA