Built-In Correction Sensor And Selfcorrection Problems - Eizo ColorEdge CX271 User Manual

7-4. Built-in correction sensor and SelfCorrection
problems
Problem
1. The built-in correction sensor does not
come out/stays out.
2. SelfCorrection cannot be executed.
3. SelfCorrection failure
Error Code Table
Error Code
0014
0034
0050
0061
44
Chapter7Troubleshooting
• ExecuteSelfCorrectionagain.
• AdjustusingColorNavigatororColorNavigatorElements.
• Thebuilt-incorrectionsensormaynothavecomeoutduringcalibration,orlightmay
haveenteredthesensorduringmeasurement.
• Turnoffthemainpower,waitforafewminutesbeforeturningthepowerbackon,and
thenexecuteSelfCorrectionagain.
• ExecuteSelfCorrectionagain.
• Thebuilt-incorrectionsensormaynothavecomeout.
• Checkwhetherthereisanyforeignobjectnearthebuilt-incorrectionsensor.
• ExecuteSelfCorrectionagain.
Possible cause and remedy
• Turnoffthemainpower,andthenturnitonagainafew
minuteslater.
• CheckwhethertheColorNavigatorlicenseiscertified.
(See"TouseColorNavigator/ColorNavigatorElements"
(page11).)
• SettheSelfCorrectiontargetusingColorNavigatoror
ColorNavigatorElements.
• Refertotheerrorcodetable.Ifanerrorcodethatdoes
notappearintheerrorcodetableisdisplayed,contact
yourlocalEIZOrepresentative.
Description