Setting Selfcorrection Schedule; Executing Selfcorrection - Eizo ColorEdge CX271 User Manual

●

Setting SelfCorrection Schedule

After executing SelfCorrection or monitor adjustment using software (ColorNavigator or ColorNavigator
Elements), set when to execute the next SelfCorrection.
Setting Range
50 hours to 500 hours (Recommended: 200 hours)
Procedure
1. Choose "SelfCorrection" from the Adjustment menu, and press
2. Choose "Schedule" from "SelfCorrection", and press
3. Choose "Interval" from "Schedule", and press
4. Select Interval with
5. Press to exit.
Note
• SelfCorrection can also be executed when there are no computer signals being input.

4-2. Executing SelfCorrection

SelfCorrection can be executed manually regardless of the schedule.
Procedure
1. Choose "SelfCorrection" from the Adjustment menu, and press
2. Choose "Execute" from "SelfCorrection", and press
The built-in correction sensor is activated, and SelfCorrection is executed.
Attention
• After selecting "Execute", aging may be executed before the built-in correction sensor is executed.
34
Chapter4SelfCorrection
or , and press .
.
.
.
.
.