6-4. Built-in correction sensor and SelfCorrection
problems
Problem
1. The built-in correction sensor does not
come out/stays out.
2. SelfCorrection cannot be executed.
3. SelfCorrection failure
Error Code Table
Error Code
0014
0034
0050
0061
• ExecuteSelfCorrectionagain.
• AdjustusingColorNavigator.
• Thebuilt-incorrectionsensormaynothavecomeoutduringcalibration,orlightmay
haveenteredthesensorduringmeasurement.
• Turnoffthemainpower,waitforafewminutesbeforeturningthepowerbackon,and
thenexecuteSelfCorrectionagain.
• ExecuteSelfCorrectionagain.
• Thebuilt-incorrectionsensormaynothavecomeout.
• Checkwhetherthereisanyforeignobjectnearthebuilt-incorrectionsensor.
• ExecuteSelfCorrectionagain.
Possible cause and remedy
• Turnoffthemainpower,andthenturnitonagainafew
minuteslater.
• Ifaproblemstillremainsafterapplyingthesuggested
remedies,contactyourlocalEIZOrepresentative.
• CheckwhethertheColorNavigatorlicenseiscertified.
(See"TouseColorNavigator"(page10).)
• SettheSelfCorrectiontargetusingColorNavigator.
• Refertotheerrorcodetable.Ifanerrorcodethatdoes
notappearintheerrorcodetableisdisplayed,contact
yourlocalEIZOrepresentative.
Description
Chapter6Troubleshooting
43