Download
Share
Print this page
Eizo ColorEdge CG221 User Manual
  1. Manuals
  2. Brands
  3. Eizo Manuals
  4. Monitor
  5. ColorEdge CG221
  6. User manual
Eizo ColorEdge CG221 User Manual

Eizo ColorEdge CG221 User Manual

Calibration color lcd monitor
Hide thumbs Also See for ColorEdge CG221:

Advertisement

Quick Links

Download this manual
SAFETY SYMBOLS
PRECAUTIONS
1. INTRODUCTION
1-1.Features
1-2.Package Contents
1-3.Controls & Connectors
2. CABLE CONNECTION
2-1.Before Connecting
2-2.Connecting the Signal
Cable (D-Sub or DVI)
2-3.Connecting the Signal
Cable (ADC)
2-4.Connecting Two PCs to
the Monitor
2-5.How to install the Hood
2-6.How to remove the Tilt
Stand
3. ScreenManager
3-1.How to use the
ScreenManager
3-2.ScreenManager
Adjustments and Settings
3-3.FineContrast
3-4.Useful Functions
4. ADJUSTMENT
4-1.Screen Adjustment
4-2.Displaying a low
resolution
4-3.Color Adjustment
4-4.Power-save Setup
5. MAKING USE OF USB
(Universal Serial Bus
6. TROUBLESHOOTING
This manual is checked under the browser settings shown
below. Text size can change for another one through
browser setting.
Microsoft Internet Exproler:
Text size: Medium
Encoding: Western European

Advertisement

loading

Related Manuals for Eizo ColorEdge CG221

Summary of Contents for Eizo ColorEdge CG221

  • Page 1 SAFETY SYMBOLS PRECAUTIONS 1. INTRODUCTION 1-1.Features 1-2.Package Contents 1-3.Controls & Connectors 2. CABLE CONNECTION 2-1.Before Connecting 2-2.Connecting the Signal Cable (D-Sub or DVI) 2-3.Connecting the Signal Cable (ADC) 2-4.Connecting Two PCs to the Monitor 2-5.How to install the Hood 2-6.How to remove the Tilt Stand 3.

  • Page 2: Specification

    7. CLEANING 8. SPECIFICATION 9. GLOSSARY APPENDIX/ ANHANG/ ANNEXE FCC Declaration of Conformity Recycle Auskunft / Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor...
  • Page 3 EIZO NANAO CORPORATION. EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO NANAO...
  • Page 4 PowerManager is a trademark of EIZO NANAO CORPORATION. ScreenManager, ColorEdge and EIZO are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries. As an ENERGY STAR determined that this product meets the ENERGY STAR guidelines for energy efficiency.
  • Page 5 IMPORTANT! This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below).
  • Page 6 Refer all servicing to qualified service personnel. Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock, or equipment damage. Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage.
  • Page 7 To avoid danger of suffocation, keep the plastic packing bags away from babies and children. Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock.
  • Page 8 Never touch the plug and power cord if it begins to thunder. Touching them may result in electric shock. When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely with the enclosed screws. Not doing so may cause the unit to become unattached, which may result in injury or equipment damage.
  • Page 9 When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet. * Do not place any objects on the ventilation slots.
  • Page 10 In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing pixels or lit pixels does not indicate damage to the LCD monitor.
  • Page 11 Thank you very much for choosing an EIZO Color Monitor The exclusive use calibration software calibrates the monitor characteristics and generate colorprofile. Dual inputs compliant Digital input (TMDS) compliant. ADC (Apple Display Connector) inputs compliant. [Horizontal scanning frequency] Analog: 31 - 94 kHz...
  • Page 12 * LCD Monitor * Power Cord * Analog Signal Cable (FD-C16) * Digital Signal Cable (FD-C39) * EIZO USB Cable (MD-C93) * EIZO LCD Utility Disk * User's Manual (in the CD-ROM) * Please retain the packing materials for future transference.
  • Page 13 ® (1) ScreenManager (2) Mode Switch (3) Auto Adjustment Switch (4) Enter Switch (5) Directing Switch (Left, Down, Up, Right) (6) Input Signal Selection Switch (7) Power Switch (8) Indicator lamp Name Custom sRGB Left Side Cal. Alert Adj. Lock Signal 1 Right Side Signal 2...
  • Page 14 (9) USB Port (2 Downstream) (10) USB Port (1 Upstream) (11) Height Adjustable Stand (Detachable) (12) Security Lock Slot (13) DVI-I Input Connector (SIGNAL 1, SIGNAL2) (14) Power Connector *2 The LCD monitor can be used with an optional arm stand by removing the stand.
  • Page 15 Before connecting your monitor to the PC, change the display screen settings (resolution and frequency) in accordance with the charts below. * When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings.
  • Page 16 Digital Input The monitor supports the following resolutions only. Resolution Frequency 640 x 480 60 Hz 720 x 400 70 Hz 800 x 600 60 Hz 1024 x 768 60 Hz 1280 x 960 60 Hz 1280 x 1024 60 Hz 1600 x 1200 60 Hz 1680 x 1050...
  • Page 17 Analog Input Signal Cable Signal Cable (FD-C16 enclosed) Signal Cable (FD-C16 enclosed) +Adapter* Digital Input Signal Cable Signal Cable (FD-C39 enclosed) 2.Plug the power cord into the power connector on the rear of the monitor. Connector Video Output Standard graphics card Connector / D-Sub Power Macintosh G3 mini 15 pin...
  • Page 18 3.Close the cable cover and lead the power cord and signal cable into the cable holder at rear of the monitor. * The cables are recommended to lead with slight sag for the smooth motion of the stand. * It's recommended to put away the signal cables into the left cable holder, and the USB cable and power cord into the right cable holder.
  • Page 19 5.Turn on the monitor's main power and then switch on the PC's power. The indicator lamp, "ON", will light up. If an image does not appear, refer to the Whenever finished, turn off the PC and the monitor. * When turning on the monitor, the kid of the input signal (Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of the screen.
  • Page 20 Signal Cable Signal Cable (FD-C39 enclosed) +ADC-DVI display adapter (commercially available) * ADC-DVI display adapter is required if the monitor connects to Power Mac G4 / G5. The adapter is commercially available. 2.Plug the power cord into the power connector on the rear of the monitor.
  • Page 21 4.Plug the other end of the power cord into a power outlet. WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock.
  • Page 22 * The unit is designed to be operated with your bare fingers. If you touch the control panel with your gloved fingers or with something left on the control panel, it may not work. * If there are waterdrops or dew condensation on the control panel, or operating with wet fingers, it may not work properly.
  • Page 23 Two PCs can be connected to the monitor through DVI-I connector and D-sub mini 15 pin connector on the back of the monitor. PC 1 Signal Cable (FD- C39 enclosed) +ADC-DVI display adapter (commercially (EX.1) Digital ADC available) Signal Cable (FD- C39 enclosed) +ADC-DVI display adapter...
  • Page 24 Signal Cable (FD- C39 enclosed) (EX.4) Digital DVI-D Signal Cable (FD- C39 enclosed) (EX.5) Digital DVI-D Signal Cable (FD- C16 enclosed) D-Sub (EX.6) Analog mini 15 Selecting the Active Input The Input Signal Selection switch on the control panel can be used to select either SIGNAL 1 or SIGNAL 2 as the active input at any time.
  • Page 25 The Priority Input Signal This function is used to select which PC will have priority to control the monitor when utilizing two PCs. The monitor constantly checks the input signals and switches automatically in accordance with the "Input Priority" setting (see table below). Once a priority is set, whenever a change of signal is detected at the selected input, the monitor will switch the input to that signal.
  • Page 26 The Hood can reduce light reflection for on screen color consistency. Setup Procedure 1.Attach the top cover to either the left cover or right cover before attaching to the monitor. * Please attach the top cover so that the visor is in back. If the visor is in front, light will seep in through the back.
  • Page 27 The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm or stand to the LCD monitor. * If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers before selecting.
  • Page 28 3.Attach an arm stand to the LCD monitor securely.

  • Page 29: Entering The Screenmanager

    ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily. * Main Menu and FineContrast menu cannot be activated at the same time. 1.Entering the ScreenManager Touch the Enter switch once to display the main menu of the ScreenManager. 2.Making Adjustments and Settings (1) Select the desired sub menu icon using the Directing switch and touch the Enter switch.
  • Page 30 3.Exiting the ScreenManager (1) To return to the main menu, select the <Return> icon or touch the Down switch twice, followed by the Enter switch. (2) To exit the ScreenManager, select <Exit> icon or touch the Down switch twice, followed by the Enter switch. * Double clicking the Enter switch at any time also exits the ScreenManager menu.
  • Page 31 Gain 6 Colors Reset PowerManager DVI DMPM VESA DPMS Others Screen Size Border Intensity Input Priority Off Timer Beep Menu Settings Indicator Reset Information Information Language English, German, French, Spanish, Italian, Swedish, Chinese•Simplified•, Chinese•Traditional• and Japanese *1 The adjustable functions on the <Color> menu depend on the selected FineContrast mode.
  • Page 32 This function allows you to select the best suited mode for screen display. To select the Mode Touching the Mode switch allows you to select the best suited mode for screen display from 4 FineContrast modes; Custom, sRGB, EMU and CAL. Exit Touch the Enter switch to exit the menu.
  • Page 33 Color Adjustment of the Mode Settings <Brightness>, <Temperature> and <Gamma> settings can be adjusted on the FineContrast menu. Select the desired function icon with the Up/Down Directing switches and adjust with the Left/Right Directing switches. (Setting(s) of <Brightness>, <Temperature> and/or <Gamma> is defined as standard default in some modes.) Detailed Adjustments The detailed color settings of each mode can be adjusted by using the <Color>...

  • Page 34: Off Timer

    switch while touching the Auto Adjustment switch. [To unlock] Turn off the monitor's power by touching the power switch. And then touch the power switch while touching the Auto Adjustment switch once again. Off Timer The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of time has lapsed.

  • Page 35: Eizo Logo Appearing Function

    "Low". (Default setting is "Medium") EIZO Logo Appearing Function When turning on the monitor, the EIZO logo is displayed for a while. If you desire to display or undisplay this logo, use this function. (Default is logo appearing.) [To undisplay] Turn off the monitor once, then touch the power switch while touching the Enter switch, and this logo is not displayed.
  • Page 36 The monitor displays the digital input image correctly based on its pre-setting data. Analog Input Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode.
  • Page 37 Having read the "Readme.txt" file, run the "Screen Adjustment Program" in the enclosed EIZO LCD Utility Disk. Step by step, adjustment is provided by the wizard guide. (If using the Windows, the program can be directly run from the menu screen of the CD-ROM.)
  • Page 38 (2) Horizontal bars appear on the screen. => Use the <Phase> adjustment. Select the <Phase> and eliminate the horizontal flickering, blurring or bars by using the Right and Left switches. * Horizontal bars may not completely disappear from the screen depending on the (3) The screen position is incorrect.
  • Page 39 (4) Screen image is smaller or larger than the actual screen images. => Use the <Resolution> adjustment. Adjustment is needed when the input signal resolution and the resolution now being displayed are different. Select <Resolution> and confirm if the resolution now being displayed is the same as the input resolution.
  • Page 40 1.Enlarge the screen size when displaying a low resolution. => Select the <Screen Size>. Select the <Screen Size> in the others menu and select the screen size by using the Up and Down buttons. Menu Displays the picture on the screen in full, irrespective of the picture's resolution.
  • Page 41 * <Smoothing> is disabled when the screen is displayed in the following resolutions. 1920 x 1200 The image size is doubled both in horizontally and vertically to (i.e. 1600 x 1200 enlarged from 800 x 600) provide clear focus which does not require this function.
  • Page 42 Icons Functions Brightness** Temperature** Gamma** Saturation Gain 6 colors Reset **These settings can be also adjusted on the FineContrast menu. * Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments. (Allow the monitor to warm Up for at least 30 minutes before making adjustments.) * Performing the <Reset>...
  • Page 43 The values shown in the Kelvin are available only as a reference tool. Adjusting the <Gain> turns the <Temperature> adjustment "OFF". Setting the temperature under 4,000 K or over 10,000 K invalidates the color temperature setting. (The color temperature's setting turns "OFF".) Gamma To set the gamma value f setting the gamma value, the using the monitor in the...
  • Page 44 The <PowerManager> menu in the ScreenManager enables to set the power-save setup. * Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely. * Even if the monitor is in a power saving mode, USB compliant devices function when they are connected to the monitor's USB (both the Upstream and the Downstream ports).
  • Page 45 Digital Input This monitor complies with the [Procedure] (1) Set the PC's power saving settings. (2) Select "DVI DMPM" from the <PowerManager> menu. [Power saving system] Operation STAND-BY Power saving SUSPEND [Power Resumption Procedure] Operate the mouse or keyboard to return to a normal screen . "DVI DMPM".
  • Page 46 PC * Windows 98/2000/XP//Mac OS 8.5.1 or later * EIZO USB Cable (MD-C93, enclosed) * The USB hub function may not work properly depending on the PC, OS or peripherals. Please consult the manufacturer of each device about the USB support.
  • Page 47 3.After setting up, the monitor's USB hub is available for connecting USB compliant peripherals to the downstream ports of the monitor. Connecting Examples...
  • Page 48 If a problem persists even after applying the suggested remedies, contact an EIZO dealer. No picture problems : See No.1 ~ No.2 Imaging problems : See No.3 ~ No.14 Other problems : See No.15 ~ No.18 USB problems : See No.19 ~ No.20 Problems 1.
  • Page 49 The signal frequency is out of range. Error signal frequency will be displayed in red. (Example) 3. Display position is incorrect. 4. Screen image is smaller or larger than the actual screen images. 5. Vertical bars of distortion appear. 6. The characters and images have several vertical bars on their right side.
  • Page 50 7. Horizontal bars of distortion appear. 8. Letters and lines appear blurred. 9. Distortion appears like the figure below. 10.The screen is too bright or too dark. 11. Afterimages appear. 12.The screen has defective pixels (e.g. slightly light or dark). 13.Fingerprints remain on the screen.
  • Page 51 15.The <Smoothing> cannot be selected. 16.The Main menu of ScreenManager does not operate. 17.The Auto adjustment switch does not operate. 18.Frequency does not change after installing "Monitor information file" in the attached utility disk on Windows 98/Me/2000/ [ ] <Smoothing> is disabled when the screen is displayed in the 1920 x 1200.
  • Page 52 [ ] Check the downstream ports by connecting the peripherals to other downstream ports. If the problem is solved by doing this, contact an EIZO dealer. (For details, refer to the manual of the PC.) [ ] Try executing the following method.
  • Page 53 Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. * Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel.
  • Page 54 56.4 cm (22.2 inch), TFT color LCD panel with Anti-Glare LCD Panel Hard Coating Viewing Angle: H: 170°, V: 170° (at contrast ratio 1:5) Dot Pitch 0.249 mm Horizontal Scan Analog: 31 - 94 kHz (Automatic) Frequency Digital: 31 - 76 kHz Analog: 49 - 86 Hz (Automatic) Vertical Scan (1600 x 1200: 49 - 76 Hz, 1920 x 1200: 49 - 61 Hz)

  • Page 55: Default Settings

    Weight 10.4 kg (22.9 lbs.) (without stand) Operating: 0 °C - 35 °C (32 °F - 95 ° F) Temperature Storage: -20 °C - 60 °C (-4 °F - 140 ° F) Humidity 30% to 80% R.H. Non-condensing USB standard USB Specification Revision 2.0 Communication 480Mbps(high), 12 Mbps (full), 1.5 Mbps (low)
  • Page 56 2 short beeps Monitor is in the advance notice mode of the Off Timer. The every 15 sec. power will be off within fifteen minutes. Dimensions Pin Assignment DVI-I Connector Unit mm (inches)
  • Page 57 1 TMDS Data 2- 11 2 TMDS Data 2+ 12 TMDS Data 2/4 Shield DDC Clock (SCL) DDC Data (SDA) Vertical Sync 9 TMDS Data1- 19 10 TMDS Data1+ 20 USB Ports (USB Specification Revision 2.0) Signal Signal TMDS Data 1/3 Shield +5V Power Ground...
  • Page 58 Clock With the analog input signal display, the analog signal is converted to a digital signal by the LCD circuitry. To convert the signal correctly, the LCD monitor needs to produce the same number clock pulse as the dot clock of the graphics system. When the clock pulse is not correctly set, some vertical bars of distortion are displayed on the screen.

  • Page 59: Gain Adjustment

    Gain Adjustment Adjusts each color parameter for red, green and blue. The color of the LCD monitor is displayed through the color filter of the LCD panel. Red, green and blue are the three primary colors. The colors on the monitor are displayed by combining these three colors.
  • Page 60 The LCD panel consists of a fixed number of pixel elements which are illuminated to form the screen image. The EIZO CG221 display panel consists of 1920 horizontal pixels and 1200 vertical pixels. At a resolution of 1920 x 1200, all pixels are displayed as a full screen.
  • Page 61 Preset Timing Chart for Analog input Timing-Übersichten für Analog Eingang Synchronisation des Signaux pour Analog numerique Based on the signal diagram shown below factory presets have been registered in the monitor's microprocessor. Der integrierte Mikroprozessor des Monitors unterstützt 30 werkseitige Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme).
  • Page 62 VESA 800×600 VESA 800×600 VESA 800×600 VESA 800×600 VESA 1024×768 VESA 1024×768 VESA 1024×768 VESA 1024×768 VESA 1152×864 VESA 1280×960 VESA 1280×1024 VESA 1280×1024 VESA 1280×1024 VESA 1600×1200 VESA 1600×1200 VESA 1600×1200 VESA 1600×1200 VESA CVT 1680×1050 VESA CVT 1920×1200 VESA CVT RB 1920×1200 40.0 MHz...
  • Page 64 Recycle Auskunft Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem Partner eds-r gmbh rücknahmesysteme. Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden. Um einen Abholtermin zu vereinbaren und die aktuellen Kosten zu erfahren, benutzen Sie bitte folgende Rufnummer: 02153-73 35 00.
  • Page 65 Recycling Information for customers in USA: All recycling information is placed in the Eizo Nanao Technologies, Inc.'s website. http://www.eizo.com/ Återvinnings information för kunder i Sverige: All information om återvinning finns på Eizo Nordics hemsida: www.eizo.se Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen.
  • Page 66 Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten Position kippsicher sein.