2-6. Expanding Signal Output Range
●
To extend the output range
The output range of the signal is extended
within the restricted range for purposes such as image creation, use this setting to improve the contrast of the
images.
Settings
On
Off
Auto
Procedure
1. Choose "Screen" from the Adjustment menu, and press
2. Choose "Range Extension" from "Screen", and press
3. Choose "Range Extension" from "Range Extension", and press
4. Select "On", "Off", or "Auto" with
Attention
• When the DVI signal is input, "Auto" cannot be selected.
5. Press
to exit.
●
To select the range of signals to extend
The method for extending signals can be selected by turning the "Super white" setting "On" or "Off".
Settings
On
Off
Procedure
1. Choose "Screen" from the Adjustment menu, and press
2. Choose "Range Extension" from "Screen", and press
3. Choose "Super White" from "Range Extension", and press
4. Select "On" or "Off" with
5. Press
to exit.
Attention
• If "Range Extension" is turned "Off", the setting can be changed but the change will not be applied.
0 - 255 for display. When images are displayed in black and white
to
Theoutputrangeofthesignalisextendedto0-255fordisplay.
Thesignaloutputrangeisnotextended.
Themonitorautomaticallyrecognizesthebrightnessrangeofinputsignalsanddisplays
imagesappropriately(recommended).
or .
Theoutputrangeofthesignalisextendedfrom16-254to0-255fordisplay.
Theoutputrangeofthesignalisextendedfrom16-235to0-255fordisplay.
or .
Function
.
.
.
Function
.
.
.
Chapter2AdjustingScreens
27