Table of Contents
Advertisement
Chapter 1 Introduction
1-1. Features
• 27.0" wide format LCD
• Wide color gamut (Adobe RGB coverage: 99%)
• Supports a resolution of 2560 × 1440.
• IPS panel with 178˚ horizontal and vertical viewing angles
• Frame synchronization mode supported (23.75 - 30.5Hz, 47.5 - 61.0Hz)
• 3 signal input terminals (DVI-D × 1, HDMI × 1, DisplayPort × 1)
- DisplayPort connector (applicable to 8 bit and 10 bit)
- HDMI connector (applicable to 8 bit, 10 bit, and 12 bit)
Can handle PC signals in HDMI input
*1 Not applicable to audio signals.
*2 The maximum screen display is 10 bits.
• Color Mode function
Reproduces a color temperature, gamma, and gamut compliant with the following standard.
®
- Adobe
RGB / sRGB
The Paper mode reproduces a printed paper effect on the monitor.
See
"2-2. To select the display mode (color mode)" (page
• Attaching the "Adjustment Certificate", which describes the factory measurement results of the grayscale and
uniformity characteristics for each monitor
• Supports portrait and landscape format (rotate 90˚ clockwise)
• This product is equipped with a built-in correction sensor, and supports SelfCorrection in which the monitor
executes display correction independently.
See
"Chapter 4 SelfCorrection" (page
• The "ColorNavigator" Color Management Software enables you to calibrate monitor characteristics and
generate color profiles
*3 The Color Management Software "ColorNavigator" is on the CD-ROM for the ColorNavigator Licensed models.
See
"1-3. EIZO LCD Utility Disk" (page
• Supports Photo Color Matching Software "ColorNavigator Elements"
This software enables you to adjust the color of the monitor easily while comparing it with a printed picture.
*4 Stored on the CD-ROM for the ColorNavigator non-licensed models. See
• Power saving function
Suppressing the power consumption reduces the carbon dioxide emissions. This product is equipped with power saving
function.
- 0 W power consumption when the main power is off
Equipped with main power switch.
When the monitor is not required, the power supply can be shut off using the main power switch.
- Auto EcoView function
The ambient light sensor on the front side of the monitor detects the environmental brightness to adjust the screen
brightness automatically and comfortably. Excessively high brightness may increase power consumption and cause
unwanted environmental effects. It may also lead to fatigue of your eyes. Use the Auto EcoView to reduce the
brightness.
See
"6-2. Enabling/Disabling Automatic Brightness Adjustment" (page
• Displays HDCP (High-bandwidth Digital Protection) protected contents.
33).
*3
11).
*1
*1,*2
19).
*4
"1-3. EIZO LCD Utility Disk" (page
39).
11).
Chapter1Introduction
7
Advertisement
Table of Contents
