To Adjust The Temperature; To Adjust Gamma - Eizo ColorEdge CX271 User Manual

●

To adjust the temperature

The color temperature can be adjusted.
The color temperature is normally used to express the color of "White" and/or "Black" by a numerical value.
The value is expressed in degrees "K" (Kelvin).
The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the flame
temperature. The gain preset values are set for each color temperature setting value.
Setting Range
Settings
4000Kto10000K
Native
®
Adobe RGB
sRGB
User
Procedure
1. Choose "Color" from the Adjustment menu, and press
2. Choose "Temperature" from "Color", and press
3. Use or for adjustment.
4. Press to exit.
Note
• "Gain" allows you to perform more advanced adjustment (see
●

To adjust gamma

Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the
variation rate is not proportional to the input signal. To keep the balance between the input signal and the
brightness of the monitor is called as "Gamma correction".
Setting Range
Settings
1.6to2.7 Setthegammavalue.
®
Adobe RGB SetthegammacurvedefinedbyAdobe
sRGB SetthegammacurvedefinedbysRGB.
Paper Displayimagelooklikeitisprintedonpaper.
Procedure
1. Choose "Color" from the Adjustment menu, and press
2. Choose "Gamma" from "Color", and press
3. Use or for adjustment.
4. Press to exit.
Specifycolortemperatureinunitsof100K
Theimageisdisplayedinthepresetcolorofthemonitor(Gain:100%foreachRGB).
ChangetocolortemperatureinconformancewithAdobe
ChangetocolortemperatureinconformancewithsRGB.
Displayedwhengainischanged.
Purpose
®
.
.
"To adjust gain" (page 25)).
Purpose
®
RGB.
.
.
Chapter2AdjustingScreens
RGB.
21