Icom IC-R20 Instruction Manual page 66

Icom america communications receiver instruction manual

Hide thumbs Also See for IC-R20:

Table of Contents

SET MODE

D D CI-V address

To distinguish equipment, each CI-V transceiver/receiver has

its own Icom standard address in hexadecimal code. The IC-

R20's address is "6C.'

When 2 or more IC-R20s are connected to an optional CT-17

V LEVEL CONVERTOR

R20 in the range "01" to "7F."

CI-V address set to 6C

D D CI-V boud rate

Sets the data transfer rate. When "AUTO" is selected, baud

rate is automatically set according to the connected controller

or other Icom CI-V radio.

"AUTO" baud rate setting

, set a different address for each IC-

(default: 6C)

CI-V address set to 01

(default: AUTO)

9600 bps setting

D D CI-V transceive

CI-V transceive operation is possible with the IC-R20 con-

nected to an Icom CI-V radio. When "ON" is selected, chang-

ing the frequency, operating mode, etc. on the IC-R20

automatically changes those of connected radios and vice

versa.

CI-V transceive OFF

(default: ON)

CI-V transceive ON

Table of Contents