Tablet Holder; Www.smoothfitness.com - Smooth Fitness SMOOTH CE-9.0 ELLIPTICAL User Manual

ASSEMBLY
STEP 12:Attach the Console and Covers
CAUTION: DO NOT PINCH THE POWER WHIRE BETWEEN THE PLASTIC
COVERS BE CERTAIN TO CENTER THE POWER WIRE CONNECTOR
BETWEEN THE COVERS
(A) Place the lower upright post covers #130A/B around the upright post (See
Fig. 12A). Make sure the lower covers are properly aligned with the upper
covers.
(B) Secure the two covers together by using 7 x #135 screws.
(C) Attach the Tablet holder to the computer and secure it by using 2 x #30
Screws (See Fig. 12B)
(D) Connect the computer wires from the computer to the computer wires
from the upright post. Route the wires as directed in Fig. 12C. Push the
extra wire down in to the upright post covers or into the back of the
computer (See Fig. 12C)
(E) Secure the console to the console mounting bracket by using 4 x #30/E
screws.
Fig. 12A
Fig. 12C

www.smoothfitness.com

Fig. 12B
Fig. 12D
Cable Connections
Cable for the main frame
Cable for the Fan/VST Board
Two cables for the heart rate
Two cables for the toggle
switches on the handrails
#135
#30/E
USB
Charging
MySmooth USB
if Equipped
Description
One large plug
Two small plugs
Two small plugs
Two small plugs
25
7
8