INSTALLATION
FACEPLATE INSTALLATION
Install the fascia to the unit by hooking the left and right side mounting brackets into the mounting slots at the side of the fi rebox as shown
below. It is recommended that you use the fi rst mounting slot (the one closest to the door frame overlay) out of the 3 so that the faceplate
and door frame overlay are fl ush with one another. See diagram below.
NOTE: There are 3 mounting slots available, this is to accommodate any fi nishing that protrudes slightly beyond the faceplate.
Diagram 1 - Contemporary Faceplate Install
Diagram 2 - Contour Faceplate Install
Warning: Turn off the unit by way of the wall switch or remote. Allow unit to cool at least 10 min. - prior to removing the faceplate.
35
Regency GF900C Gas Fireplace