Intermec EasyCoder 3400e User Manual page 97

NugFont
HelvC
This section describes the specifications of the 3400e printer.
Input Voltage 100, 120, or 230 VAC ± 10%
Frequency 47-63 Hz
The 3400e printer is capable of direct thermal (DT) printing or thermal transfer (TTR)
printing using thermal transfer ribbon.
Operating 10°C to 40°C (50°F to 104°F)
Humidity 10% to 90% noncondensing
The self-strip rewinder hub can take up the backing of an entire 15,240-centimeter
(6,000-inch) roll of media.
Peel Release 10-50 grams
Note: Self-strip printing is an option that you order with your printer.
Asynchronous RS-232C, RS-422, RS-485 interfaces
Serial ASCII code
Hardware (Ready/Busy) Flow Control
XON/XOFF Protocol
Intermec Standard Block Protocol
Polling Mode D Protocol
Multi-Drop Protocol
Baud Rates: 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,00, 115,200
Height
Width
Length
Weight
C
27.9 cm (11 inches)
26.7 cm (10.5 inches)
43.2 cm (17 inches)
15.8 kg (35 pounds)
A
39
Specifications
A-3