Intermec EasyCoder 3400e User Manual page 24

EasyCoder 3400e Bar Code Label Printer User's Manual
The hardware test label provides these statistics:
If you are unable to print a hardware configuration test label, see "Printer Operation
Problems" in Chapter 4.
You can connect your printer to a PC, a local area network, an AS/400 (or other
midrange computer), or a mainframe. This section tells you how to connect your printer
to any of these systems.
This illustration shows you where to connect your system to the printer. You can use
any of these three ports on the rear of the printer:
1-10
Amount of installed memory
Amount of media printed
Printhead configuration
Firmware information
Printhead alignment (the vertical lines)
Serial communications port
Parallel port
I/O board port (if you have an adapter card installed)
Parallel port
Optional I/O
board port
Serial
communications
port
O
3XXXU.008