Intermec EasyCoder 3400e User Manual page 36

EasyCoder 3400e Bar Code Label Printer User's Manual
Green LED
Orange LED
Yellow LED
2-4
Use the front panel LEDs to monitor the status of the printer:
Power/Data
Alert
Empty/Pause
Feed/Pause
Over-temperature If the printer overheats, the Alert LED flashes and the printer
stops. Do not try to troubleshoot or adjust the printer—just allow the printer enough
time to cool down and it will resume operation on its own.
Media or system faults If the Empty/Pause or the Alert LED remains on, your printer
is experiencing a media or system fault. For help, see Chapter 4, "Troubleshooting."
* 1233*
HelvC
LED
Power/Data
Alert
Empty/Pause
3440U.012
State Indication
Off Power off
On Power on
Flashing Receiving data
Off Printing or idle
Flashing Over-temperature
On System fault
Off Printing or idle
Flashing Paused
On Media fault